Symptom Guides
Appliance Symptom Guides
Six guides for the faults callers describe most: a washer that will not drain, a leaking dishwasher or fridge, a fridge that stays warm and a dryer with no heat.
Lines open:
Calls may be recorded and routed to a local appliance repair provider.
Guides by Symptom
Each guide starts with the likely cause, then gives safe checks and North Carolina numbers that bear on the fault.
- Washer not draining: causes, checks and NC freezing-night dataPump filter, hose and standpipe checks, with freezing-night counts for seven NC stations.
- Dishwasher not draining or leaking: causes, checks and NC hard-water dataFilter, hose and gasket checks, with USGS well hardness for three NC counties.
- Refrigerator leaking water: causes, checks and NC climate dataDefrost drain, supply line and ice maker checks, with warm-night and freeze data.
- Refrigerator not cooling: causes, checks and NC heat and cost dataCoil, vent and defrost checks, with 90°F day counts and a running-cost model.
- Dryer not heating, gas and electric: causes, checks and NC dataVent, breaker and gas checks, with Census gas-heat shares for nine NC cities.
- Repair or replace an appliance: lifespans and NC energy mathLifespan ranges, repair-history signs and electricity math at North Carolina rates.
What Every Guide Includes
A short answer comes first, followed by a pattern table that matches what you notice to a likely cause. Safe checks stay outside sealed parts, and stop signs say when to call.
Numbers come from public sources and every table carries a source line. Where a figure is a model, the assumptions sit under the table.
Error Codes and Service Pages
Display codes and brand faults have their own library, and each appliance has a statewide service page.
A code on the display points to the cause faster, and the appliance error code library for washers, dryers, dishwashers and fridges list what each brand means by it. The service side starts at fridge repair service across the state.
Symptom FAQs
Appliance Symptom Guides Questions
Answers about how the guides work.
What do the symptom guides cover?
Each guide covers one fault: the usual causes, safe checks, signs to stop and call, and public North Carolina data such as freezing nights, hard-water readings and electricity prices.
Do the guides replace a repair visit?
No. They are general information. A local company that takes the call diagnoses the appliance and sets its own charges.
Where does the data come from?
NOAA climate normals, Census housing tables, USGS well samples, EIA electricity prices, ENERGY STAR product pages and the InterNACHI lifespan chart. Each guide lists its sources and limits.
How does the call work?
Call, enter your ZIP code when the line asks, and the call connects to an independent local company. Tell that company what the appliance is doing.
Appliance Acting Up Today
Call, enter your ZIP code when the line asks, then tell the connected company what the appliance is doing.
General information only
Brand names are trademarks of their owners. Appliance Repair North Carolina is not affiliated with any manufacturer. Guides are general information and do not diagnose a specific appliance.
